Side frames
This is the first step towards eliminating the need for a
table on which to place your hand controls. You will need this fitting to allow
you to attach our platforms to carry any of the many accessories you may want
to use to make your simulation more realistic and enjoyable. The side frame
clamps to the pedal frame cross bar in a few seconds. Up to four side frames
can be clamped to the cross bar and each side frame will take two platforms.
DIY Platform
This is a 120mm
+ 90mm flat plate with a 5mm hole in each corner and a 200mm pedestal
welded in the centre . This fits onto the side
frame, will rotate 360 degrees and is height adjustable. The purpose of this
small platform is to enable you to make up your
own custom fittings and attachments. You can stick, Velcro, or screw
what ever you want to it, You can make a small
table for keyboard or mouse, clamp on your yoke or motor racing wheel, or just make something to stand your coffee cup
on, (and you can use more than one platform.)
All steel parts are industrially plated for surface protection, and held in place by hand tightened Tri-Wheels. These allow very fast secure assembly, together with precise adjustment.
BACK TO MENU
